Call the World of Fax Order Hotline at 1-866-FAX-PART for Helpful Order Assistance!!!

      RETURN TO WORLD OF FAX MAIN PAGE

COMMON ERROR CODES FOR THE:

Brother Fax 1250MC Error / Troubleshooting Codes, Brother Fax 1250MC fax Parts, Brother Intellafax 1250MC Part, Brother Fax 1250MC Fax Machine Part, Brother Fax 1250MC fax Supplies, Brother Fax 1250MC fax Fuser Unit, Brother Fax 1250MC Manuals, Brother Fax 1250MC Repairs, Brother Drums, Brother Fax 1250MC, Brother Fax Parts, Brother Intellafax Part, Brother Fax 1250MC Error / Troubleshooting Codes     FAX 1250MC

CODE DESCRIPTION
81 Cam home positioning error
82 Recording paper feeding error
83 Recording paper jam. The paper edge sensor remains ON.
84 Recording paper jam. The paper ejection sensor remains ON.
85 Ribbon empty.
87 Fails to complete the sequence of recording operation.
88 Recording paper jam. Even after the paper edge sensor has come ON, the paper ejection sensor still stays OFF.
8A Wrong or weak contact of the recording head connectors.
8B Recording head overheat.
A1 Top cover opened.
A2 Document too long to scan.
A3 Document not detected by the document rear sensor.
A4 50% or more faulty of white level data.
A5 Faulty operation of DMAO during scanning.
A6 Faulty operation of DMA1 during scanning.
A7 One-line feeding time-out error.
A8 One-line scanning time-out error.
A9 Abnormal scanning reference voltage.
AB Document feed-in amount measuring error.
AC Less than 50% faulty of white level data.
B1 CODEC LSI error.
B8 Amplifier gain error.
B9 Light emission intensity error of the LED array.
BA Scanning error: The Left-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected.
BB Scanning error: The right-hand black reference line which is marked on the document pressure bar for scanning width setting is not detected.
BC Scanning error: Reduction miss.
BD Scanning error: Enlargement miss.
D1 The MODEM setup bit sticks to High.
D2 CTS stays OFF or ON if the MODEM RTS is turned ON or OFF, respectively.
D3 Bit B1 A of the MODEM stays OFF.
D4 Bit RX of the MODEM stays OFF.
D5 The MODEM fails to complete the command transmission sequence.
D6 No MODEM interrupt for 60 seconds.
E1 Microprocessor MPU error on the control panel PCB.
E4 Out of recording paper.
E5 Recording paper set error.
E6 Write error in E2PROM.

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

Return to Brother Fax Parts, Brother Intellafax Part, Brother Fax Machine Part, Brother Fax Supplies, Brother Fax Fuser Unit, Brother Fax Manuals, Brother Fax Repairs, Brother Drums, Brother Fax 1150MC, Brother Fax 1170, Brother Fax 1250 MC, Brother Fax 1270, Brother Fax 1350 MC, Brother Fax 1450 MC, Brother Fax 1550 MC, Brother Fax 1570, Brother Fax 1800C, Brother Fax 2300 ML, Brother Fax 2400 ML, Brother Fax 2500 ML, Brother Fax 2600, Brother Fax 2750, Brother Fax 2800, Brother Fax 2900, Brother Fax 3500 ML, Brother Fax 3550, Brother Fax 3650, Brother Fax 3750, Brother Fax 3800, Brother Fax 4100, Brother Fax 4750, Brother Fax 4750e, Brother Fax 5750, Brother Fax 5750e, Brother MFC 1750 MC, Brother MFC 1770, Brother MFC 1850 MC, Brother MFC 1950 MC, Brother MFC 1970, Brother MFC 3100C, Brother MFC 4000 ML, Brother MFC 4350, Brother MFC 4400 ML, Brother MFC 4450, Brother MFC 4500 ML, Brother MFC 4550, Brother MFC 4600, Brother MFC 4650, Brother MFC 4800, Brother MFC 5100C, Brother MFC 5500 ML, Brother MFC 5550 ML, Brother MFC 6800, Brother MFC 7000C, Brother MFC 7050C, Brother MFC 7150C, Brother MFC 7160C, Brother MFC 7200C, Brother MFC 7300C, Brother MFC 7400C, Brother MFC 7550, Brother MFC 7650, Brother MFC 7750, Brother MFC 8300, Brother MFC 8500, Brother MFC 8600, Brother MFC 8700, Brother MFC 9700, Brother MFC 9800, Brother DCP 1000, Brother DCP 1200, Brother DCP 1400, Brother Fax Parts, Brother Intellafax Part main page                        

RETURN TO WORLD OF FAX HOME PAGE