World of Fax & Copiers
Fax, Copier & Printer Parts/Supplies Specialist

 We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp,  Toshiba, Panasonic, Ricoh 

     Outside or within the U.S. (845) 624-2332
     Toll Free 1-866-FAX-PART (866-329-7278)

FAX ORDERS TO 845-624-2299

COMMON ERROR CODES FOR THE:

    MFC 7000FC

CODE DESCRIPTION
10 When the light source (fluorescent lamp) was OFF, no A/D reference values of CCD video signals could be detected since it is less than the lower limit.
13 When the light source (fluorescent lamp) was ON, the A/D reference values of CCD video signals were less than the lower limit.
14 When the light source (fluorescent lamp) was ON, the A/D reference values of CCD video signals exceeded the upper limit.
20 Head driver temperature error.
21 No purge operation has started although commanded.
22 A sequence of purge operation could not finish.
23 Internal Centronics interface timeout.
31 The carriage cannot travel to the right or left.
32 After driven by the specified number of pulses, the carriage does not stop (since it cannot detect the left end of the travel).
33 The carriage movement parameter exceeded the travel range during printing.
34 When initialized, the carriage could not detect the right or left end of the travel range.
35 The carriage cannot move by a shortest distance.
36 The carriage cannot move by a short distance
37 The carriage cannot move at all.
38 The carriage stop position is out of the travel range.
3A Sudden carriage stop during printing acceleration.
3B Sudden carriage stop during printing deceleration.
3E The carriage has overridden the travel range.
41 When the power was applied, the head power feed signal stuck to High even after the head current shutdown sequence.
42 Even after the head current shutdown sequence for head replacement, the head power feed signal stuck to High.
43 The head drive voltage sticks to low.
46 The number of performed purge sequences has reached the limit.
47 ROM error.
48 Internal RAM error.
49 PWM value of the black LED out of the specified range.
4A Ink cartridge load error detected when the power was applied.
4B Abnormal carriage travel speed detected when the power was applied.
4C Head voltage error
50 The purge cam HP switch does not come ON or go OFF even after the purge cam has been driven by the specified number of pulses.
51 The purge cam HP switch sticks to ON in the initialization sequence.
52 At the time of purge operation, the carriage has not stopped in the purge position.
53 The purge cam HP switch has come ON when the carriage was in the wipe position.
54 Abnormal number of pulses required for a single rotation of the purge cam.
70 Ink-empty mark error
73 No ink cartridge loaded.
74 All four color inks have run out.
79 Head thermistor broken.  -  SOLUTION: REPLACE FUSER UNIT
7A The carriage encoder failed to detect a paper jam.
7E No print head mounted.
80 Recording paper size error
82 Recording paper feeding error
83 Recording paper jam. (MFC7000FC: The 1st-bin registration sensor sticks to OFF, indicating that paper has jammed.)
84 Recording paper jam. (The ink empty sensor detects a paper jam.)
88 Recording paper jam (MFC7000FC: Even after the 1st-bin registration sensor has come ON, the ink empty sensor does not detect paper.)
A1 Top cover opened.
A2 Document too long to scan.
A3 Document not detected by the document rear sensor.
A4 50% or more faulty of white level data.
A5 Faulty operation of DMAO during scanning.
A6 Faulty operation of DMA1 during scanning.
A7 One-line feeding timeout.
A8 One-line scanning timeout.
AC Less than 50% faulty of white level data.
AD 1st-bin's or 2nd-bin's front cover opened.
E4 Out of recording paper
E6 Write error in E2PROM
F3 Voice message recording or playing-back not started.
F6 PC interface error

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

Return tomain page

RETURN TO WORLD OF FAX HOME PAGE