World of Fax & Copiers
Fax, Copier & Printer Parts/Supplies Specialist

 We Stock full line of parts for Sharp, Xerox, Canon, Brother, Hp,  Toshiba, Panasonic, Ricoh 

     Outside or within the U.S. (845) 624-2332
 
  
Toll Free 1-866-FAX-PART (866-329-7278)

FAX ORDERS TO 845-624-2299

COMMON ERROR CODES FOR THE:

    MFC 7150C

CODE DESCRIPTION
23 Printer engine time out.
25 Ink cartridges had already been loaded when the power first applied.
31 The carriage cannot travel to the right or left.
32 after driven by the specified number of pulses, the carriage does not stop
33 The carriage movement parameter exceeded the travel range during printing.
34 When initialized , the carriage could not detect the right or left end of the travel range.
35 The carriage cannot move in midway of travel.
38 The carriage stop position is out of the travel range.
39 Printing area error.
3A Sudden carriage stop during printing acceleration
3D The carriage has overridden the travel range
41 The head drive voltage has not been turned Low to High within the specified time.
42 The head drive voltage has not been turned High to Low within the specified time.
43 The head drive voltage sticks to Low.
44 Head thermistor broken
45 Head thermistor short-circuited.
46 The number of performed purge sequences has reached the limit
4B Abnormal carriage travel speed detected when the power was applied.
4C Head rated voltage data stored in the EEPROM on the head PCS is invalid.
50 The purge came HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
51 The purge came HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses.
52 At the time of purge operation, the carriage has not stopped in the purge position
53 The purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
54 When reset, the purge cam HP switch does not come ON even after the purge cam has been driven by the specified number of pulses.
55 When reset, the purge cam HP switch does not go OFF even after the purge cam has been driven by the specified number of pulses.
82 Recording paper feeding error.
83 Recording paper jam. (The registration sensor sticks to OFF, indicating that paper jam.)
84 Recording paper jam. (The paper ejection sensor has detected a paper jam.)
88 Recording paper jam. ( Even after the registration sensor has come ON, the paper ejection sensor does not detect paper.)
A1 Top cover opened.
A2 Document too long to scan.
A3 Document not detected by the document rear sensor.
A4 50% or more faulty of white level data.
A7 One-line feeding timeout.
A8 One-line scanning timeout.
AC Less than 50% faulty of white level data.
B8 A/D voltage regulation error
B9 Light emission intensity error of the LED array.
D5 The Modem has failed to complete the command transmission sequence.
E4 Out of recording paper.
E6 Write error in EEPROM
E8 Data scanning error during transmission
EA Document removed at phase B
F3 Voice message recording or playing-back not started.
F6 PC Interface error.

FOR A COMPLETE PARTS LISTING FOR THIS MODEL CLICK HERE

Return tomain page

RETURN TO WORLD OF FAX HOME PAGE